CQ Series - AC Power Sequencing for Audio
Stand Alone Power Sequence Modules. Economical, Reliable and Adaptable to Systems Designs
- No master controller required.
- Scalable for very small or very large systems.
- Easy to install.
- Reliable.
- In stock.
- Available technical support.
All CQ Series products feature a pair or pairs of power outputs which are turned on and off in a predetermined sequence. Equipment to be powered plugs directly into the CQ device. No master control module is needed. All CQ models have the ability to transmit a sequence command to another CQ unit or to receive a remote sequence command from another CQ unit or other command component. In this way, any CQ Series product can be a master or slave unit. (Exception: CQ-1 has no on-board control switch and can't be a master unit.) Building a power sequencing system is as easy as connecting CQ power modules together with RJ45 cable.
The selection of CQ Series models depends on the specific requirements of a particular installation: number and location of circuits, current (amps) requirement of each circuit, number of control locations and number of sequence events. Select only the specific CQ Series products to meet a specific requirement.
APPLICATION EXAMPLES
Click here to see our Application Notes for examples of various configurations of CQ models in simple or complex power control networks.
CABLE ASSEMBLY
CQ Series cable is easy to assemble and very similar to standard CAT 5 cable. But, it's not exactly the same. Click here for information about CQ Series cable assembly.
SAFETY CERTIFICATION
CQ Series products have been tested and listed by Intertek to UL 508:1999 Ed.17+R:16 (October 2013)
CQ 1
The CQ-1 is a great in-wall extension of the CQ product series for powered speaker systems. It functions just like the other CQ models with plug-and-play simplicity. It fits in a two gang box + room for the hot, neutral and ground power leads.
$355.00
CQ 1515
The CQ-1515 is a single space rack mount device featuring 7 AC power outputs on the rear of the chassis with a combined rating of 15 amps. One output is unswitched. The remaining 6 outputs are grouped into 3 Power Pods of two outputs each. Each Power Pod is an individual sequence event. All outputs have Juice Goose quality surge and spike protection.
$622.00
CQ 1515-RX
The CQ 1515-RX combines reliable AC power sequencing with the proven performance of the Juice Goose RX Series surge protection and filtration.This is the same unit as the CQ 1520-RX, but with a fifteen amp rating.
$819.00
CQ 1520
The CQ-1520 is a power sequencer featuring 7 AC power outputs on the rear of the chassis with a combined rating of 20 amps. One output is unswitched. The remaining 6 outputs are grouped into 3 Power Pods of two outputs each. Each Power Pod is an individual sequence event. All outputs have Juice Goose quality surge and spike protection and line noise filtration.
$658.00
CQ 1520-RX
The CQ 1520-RX combines reliable AC power sequencing with the proven performance of the Juice Goose RX Series surge protection and filtration.
$854.00
CQ 2200
The CQ-2200 has two sequence events on a single twenty amp, hardwired circuit.This allows staging inrush loads or providing time delay for audio equipment power on and off.
$392.00
CQ 3000
The CQ-3000 is necessary for high current, low frequency amplifier control. This product integrates seamlessly with the other CQ products in a small, simple or large, complex power control network.
$692.00
CQ 50
The CQ 50 is a convenient plug-in addition to the CQ product series for remote, non racked AV equipment. It functions just like the other CQ models, is easy to install and simple to operate. CQ 50 mounts easily with two flanges on the chassis and plugs into any fifteen amp AC outlet. The detachable power cord allows adaptation to a range of installation designs.
$373.00
CQ PD1-4
This autonomous, four step sequencer contains all the circuitry needed for timing and communications with other Juice Goose CQ Series units.
$704.00