- About Us
- Contact Us
The TC1 features a superior chassis design which consists of a main "uni-body" in which the front bottom and back are constructed from a single piece.
The TC1 features a superior chassis design which consists of a main "uni-body" in which the front bottom and back are constructed from a single piece. The chassis top is easily removed should service ever be required. Strengthened side mounting brackets are reversable. In one position the front of the unit can be mounted flush with the front of an equipment rack. Or, the brackets can be reversed so the entire TC1 is mounted in front of the rack.
The very shallow, 5" chassis allows room behind the TC1 unit for large cable runs. Ventilation holes have been maximized in the top and bottom of the unit to allow increased convection air flow through the TC1.
|Rack Mount||Single Rack Space 19" x 1.75"|
|Dimensions (inches)||1.72H x 19.00W x 5.00D|
|Main Chassis||0.08 Aluminum, Clear Anodized|
|Mounting Brackets||0.09 Aluminum, Clear Anodized|
|Voltage||48VDC or 24VDC Factory Set|
|Main Internal Bus||10AWG|
|Fuse Connect Wiring||16AWG|
|Polarity||Positive or Negative|
|Circuit Breaker||Two, 30 Amp, Thermal|
|Fused Circuits||10 x 2, GMT Type, 15 Amp Max|
|Power Input||Screw Down, Barrel Lug|
|Power Output||Two 10 Position Phillip Screw Terminals|
|Redundancy||Complete Duplication, Side A and Side B|
|Local Fuse Alarm||One LED for Each Side|
|Remote Fuse Alarm||Normally Open and Normally Closed Terminals|