JG and RM SERIES
RACK MOUNT POWER DISTRIBUTION
JG Junior - Power distribution shall be the Juice Goose JG Jr. It shall have a 15 amp
capacity and be rack mountable in a 19" x 1U space. It shall have 6 outlets on the
back of the chassis and a combined master power switch and current overload, secondary
protection device on the front of the chassis. The AC receptacles shall be oriented such
that the grounding contact is at the bottom of the receptacle.
JG 8.0 - Power distribution shall be the Juice Goose JG 8.0. It shall be rack mountable
in a 19" x 1U space. It shall have 8 outlets on the back of the chassis in addition
to a thermal, 15 amp current overload, secondary protection device. The front panel shall
feature a lighted master power switch. Additional features shall include a power surge
protection across the hot, neutral and ground leads. The AC receptacles shall be oriented
such that the grounding contact is at the bottom of the receptacle.
JG 8.0L - Power distribution shall be the Juice Goose JG 8.0L. It shall have a 15 amp
capacity and be rack mountable in a 19" x 1U space. It shall have 8 outlets on the
back of the chassis in addition to a thermal, 15 amp current overload, secondary
protection device. The front panel shall feature a) two slide out light tubes that may be
turned on or off and dimmed with a control knob on the front of the chassis and b) a
lighted master power switch. Additional features shall include a power surge protection
across the hot, neutral and ground leads. The AC receptacles shall be oriented such that
the grounding contact is at the bottom of the receptacle
JG8.0LM - Power distribution shall be the Juice Goose JG 8.0LM. It shall be rack
mountable in a 19" x 1U space. It shall have 8 outlets on the back of the chassis in
addition to a thermal, 15 amp current overload, secondary protection device. The front
panel shall feature a) a color coded 20 segment LED voltage meter to measure AC line
voltage between 90 and 130 VAC, b) two slide out light tubes that may be turned on or off
and dimmed with a control knob on the front of the chassis and c) a lighted master power
switch. Additional features shall include a power surge protection across the hot, neutral
and ground leads. The AC receptacles shall be oriented such that the grounding contact is
at the bottom of the receptacle
JG11.0-20A - Power distribution shall be the Juice Goose JG11.0-20A. It shall have a 20
amp capacity and be rack mountable in a 19" X 1U space. It shall have a total of 11
NEMA 5-15R AC receptacles, 10 on the rear of the chassis and 1 on the front. One front and
one rear receptacle shall be unswitched. The power cable shall be 15 feet long. The AC
receptacles shall be oriented such that the grounding contact is at the bottom of the
receptacle
RP100-RX AC power distribution and protection shall be the Juice Goose RP100-RX
transformer based filter. This unit shall have be rack mountable in a 19" X 1U space.
It shall have a total of 11 NEMA 5-15R AC receptacles on the rear of the chassis. Power
protection shall have nominal maximum power surge let through of 10 volts on normal mode
and 0.5 volts on common mode without producing contaminating voltage on the ground lead.
High frequency AC filtration shall be equal to or better than 60 db on normal mode and 80
db on common mode. The front, bottom and back of the chassis shall be formed from a single
piece of steel and the rack mounting brackets shall be reinforced steel. Other features
shall include over voltage and wiring fault shut down and a BNC type connector on the
front of the chassis for provision of 12 VAC for use with a flexible work light.
RM-115-10
POWERX
HYBRID FILTER AND SURGE PROTECTION
RX15-DPC AC line protection shall be the Juice Goose RX15-DPC transformer based filter.
This unit shall have 9 AC outlets and a 5 foot power cord for attachment to an AC outlet
installed in a wall or similar surface. This device shall have nominal maximum power surge
let through of 10 volts on normal mode and 0.5 volts on common mode without producing
contaminating voltage on the ground lead. High frequency AC filtration shall be equal to
or better than 60 db on normal mode and 80 db on common mode. Other features shall include
over voltage and wiring fault shut down. This line protection shall have a 15 amp
capacity.
RX10-SCS AC line protection shall be the Juice Goose RX10-SCS transformer based filter.
This unit shall be an AC power extension cord with NEMA 5/15P on one end and NEMA 5/15R on
the other and shall include the Juice Goose transformer based filter module in between.
This device shall have nominal maximum power surge let through of 10 volts on normal mode
and 0.5 volts on common mode without producing contaminating voltage on the ground lead.
High frequency AC filtration shall be equal to or better than 60 db on normal mode and 80
db on common mode. Other features shall include over voltage and wiring fault shut down.
This line protection shall have a 10 amp capacity.
RP100-RX AC power distribution and protection shall be the Juice Goose RP100-RX
transformer based filter. This unit shall have be rack mountable in a 19" X 1U space.
It shall have a total of 11 NEMA 5-15R AC receptacles on the rear of the chassis. Power
protection shall have nominal maximum power surge let through of 10 volts on normal mode
and 0.5 volts on common mode without producing contaminating voltage on the ground lead.
High frequency AC filtration shall be equal to or better than 60 db on normal mode and 80
db on common mode. The front, bottom and back of the chassis shall be formed from a single
piece of steel and the rack mounting brackets shall be reinforced steel. Other features
shall include over voltage and wiring fault shut down and a BNC type connector on the
front of the chassis for provision of 12 VAC for use with a flexible work light.
PD SERIES
CUSTOM MULTIPLE CIRCUIT POWER DISTRIBUTION
PD1A - Power distribution inside the rack shall be the Juice Goose PD1A, multiple
circuit vertical power strip. It shall contain 12 NEMA5-20P duplex receptacles. It shall
contain ____ twenty amp circuits. Isolated ground receptacles need (not) be provided. The
wire harness shall be _____ feet long and exit the (top) (bottom) of the chassis. The
circuits shall be connected to the receptacles in the following manner:
PD1B - Power distribution inside the rack shall be the Juice Goose PD1B, multiple
circuit vertical power strip. It shall contain 6 NEMA5-20P duplex receptacles. It shall
contain ____ twenty amp circuits. Isolated ground receptacles need (not) be provided. The
wire harness shall be _____ feet long and exit the (top) (bottom) of the chassis. The
circuits shall be connected to the receptacles in the following manner:
PD3 - Power distribution inside the rack shall be by way of a Juice Goose PD3, multiple
circuit vertical power strip. This power strip shall contain ____ 20 amp circuits and ____
thirty amp circuits. Isolated ground receptacles need (not) be provided. The wire harness
shall be _____ feet long and exit the (top) (bottom) of the chassis. The circuits shall be
connected to the receptacles in the following manner:
CQ SERIES
POWER SEQUENCING AND REMOTE CONTROL
CQ1520 Rack mounted electric power sequencer shall be the Juice Goose CQ1520. It shall
feature one unswitched AC receptacle plus three twenty amp duplex receptacles which will
turn on and off in three sequence steps on a single 20 amp circuit. It shall not require a
remote control device to operate but shall be capable of being activated by a remote,
latching contact closure. This device shall also be capable of triggering other similar
power activation devices. The sequencer shall have an override switch to turn on the unit
in the event of failure of the main control circuit. Actual current switching shall be by
way of mechanical relays of a minimum 30 amp rating. It shall also have LED indications
that each sequence event is completed. Interconnection of this unit with other sequencers
or trigger devices shall be by way of RJ12 cables and connectors.
CQ2000 Electric power sequencer shall be the Juice Goose CQ2000. It shall feature one
twenty amp duplex receptacle which will turn on and off on a single 20 amp circuit. It
shall not require a remote control device to operate but shall be capable of being
activated by a remote, latching contact closure. This device shall also be capable of
triggering other similar power activation devices. The sequencer shall have an override
switch to turn on the unit in the event of failure of the main control circuit. Actual
current switching shall be by way of a mechanical relay of a minimum 30 amp rating. It
shall also have an LED indication that the sequence event is completed. Interconnection of
this unit with other sequencers or trigger devices shall be by way of RJ12 cables and
connectors.
CQ2200 Electric power sequencer shall be the Juice Goose CQ2200. It shall feature two
twenty amp duplex receptacle which will turn on and off in two sequence steps on a single
20 amp circuit. It shall not require a remote control device to operate but shall be
capable of being activated by a remote, latching contact closure. This device shall also
be capable of triggering other similar power activation devices. The sequencer shall have
an override switch to turn on the unit in the event of failure of the main control
circuit. Actual current switching shall be by way of two mechanical relays of a minimum 30
amp rating. It shall also have LED indications that each sequence event is completed.
Interconnection of this unit with other sequencers or trigger devices shall be by way of
RJ12 cables and connectors.
CQ3000 Electric power sequencer shall be the Juice Goose CQ3000. It shall feature one
thirty amp twist lock receptacle (NEMA L5-30R) which will turn on and off on a single 30
amp circuit. It shall not require a remote control device to operate but shall be capable
of being activated by a remote, latching contact closure. This device shall also be
capable of triggering other similar power activation devices. The sequencer shall have an
override switch to turn on the unit in the event of failure of the main control circuit.
Actual current switching shall be by way of one mechanical relay with two, parallel 30 amp
rated circuit paths. The relay shall have silver cadmium contacts. The sequencer shall
also have LED indications that the sequence event is completed. Interconnection of this
unit with other sequencers or trigger devices shall be by way of RJ12 cables and
connectors.
CQ-PD1-4 Rack mounted electric power sequencer shall be the Juice Goose CQ-PD1-4. It
shall feature four twenty amp duplex receptacles which will turn on and off in four
sequence steps, each on an individual 20 amp circuit. Power input connections shall be by
a four foot wire harness which shall exit from the top of the unit. The sequencer shall
not require a remote control device to operate but shall be capable of being activated by
a remote, latching contact closure. This device shall also be capable of triggering other
similar power activation devices. The sequencer shall have an override switch to turn on
the unit in the event of failure of the main control circuit. Actual current switching
shall be by way of mechanical relays of a minimum 30 amp rating. Interconnection of this
unit with other sequencers or trigger devices shall be by way of RJ12 cables and
connectors.
|
